Influence of Thermoplastic Metal Deformation on the Stress-strain State of the Restoration and Hardening of External Cylindrical Surfaces of the Parts

V.N. Khromov

Abstract


The formation of the stress- strain state when restoring worn piston pin internal combustion engine vehicles thermoplastic deformation of the metal. Showing the mechanisms of formation and residual stresses in the cross section of reduced piston pin due to the deformation of the thermoplastic and phase transformations in the outer surface layer of cemented on the piston pin. The technology recovery cylinder liners thermoplastic cal deformation with simultaneous hardening and the sequence of machining allowances received.


Full Text:

PDF

References


Khromov V.N. Influence of hardening of details on traf-fic accidents of vehicles during their operation on an example of the recovery cylinder liners of internal combustion engines [Vliyaniye uprochneniya detaley na dorozhno-transportnyye proisshestviya transportnykh sredstv pri ikh ekspluatatsii na primere vosstanovleniya gilz tsilindrov dvigateley vnutren-nego sgoraniya], Uprochnyayushchiye tekhnologii i pokrytiya [Hardening and coating technology], 2014, no. 2, pp. 44-47.

Khromov V.N. Hardening and recovery of the external and internal surfaces of the parts of the "hollow cylinder" thermoplastic deformation [Uprochneniye i vosstanovleniye naruzhnykh i vnutrennikh poverkhnostey detaley tipa “polyy tsilindr” termoplasticheskim deformirovaniyem], Izobretateli – mashinostroyeniyu [Inventors – engineering], 2012, no. 12, pp. 9-14.

Khromov V.N. Strengthening and restoration of compo-nents of diesel thermal elasticoplastic deformation in the manufacture and repair of machines [Uprochneniye i voss-tanovleniye detaley dizeley termouprugoplasticheskim de-formirovaniyem pri proizvodstve i remonte mashin], Tya-zheloye mashinostroyeniye [Heavy Machinery], 2005, no. 4, pp.15-17.

Khromov V.N. Technology hardening and recovery ma-chine parts thermal elasticoplastic deformation [Tekhnologiya uprochneniya i vosstanovleniya detaley mashin termoupru-goplasticheskim deformirovaniyem], Tekhnologiya mashi-nostroyeniya [Mechanical Engineering Technology], 2001, no. 6, pp. 39-42.

Khromov V.N., Senchenkov I.K. Uprochneniye i voss-tanovleniye detaley mashin termouprugoplasticheskim de-formirovaniyem [Hardening and recovery machine parts thermoelasticplastic deformation], Eagle, OGSKHA Publisher, 1999, 221 p.

Khromov V.N., Senchenkov I.K. Termouprugo-plasticheskoye deformirovaniye metalla: Vosstanovleniye detaley mashin [Deformation of the metal thermal elastico-plastic Recovery machine parts], Eagle, Publisher OrelGTU, 2002. 219 p.

Vasilii Khromov. Vosstanovleniye i uprochneniye de-taley mashin i instrumenta. Termoplasticheskoye deformiro-vaniye metalla [Elektronnyy resurs]: monografiya [Restora-tion and hardening machine parts and tools. Thermoplastic deformation of metal [electronic resource]: monograph], LAP Lambert Academic Publishing, 2012. 280 p. - Available at: //https://www.lappublishing.com/catalog/details/ store/gb/book/978-3-659-25718-6/Восстановление-и-упрочнение-деталей-машин-и-инструмента?search=%D1% 85%D1%80%D0%BE%D0%BC%D0%BE%D0%B2 (date accessed 23/04/2014 ).




DOI: http://dx.doi.org/10.24892/RIJIE/20140206

Refbacks

  • There are currently no refbacks.


Copyright (c) 2016 V.N. Khromov

© Russian Internet Journal of Industrial Engineering. ISSN 2310-0818

E-mail: indust.engineering.ru@gmail.com

Another version of the web site: http://indust-engineering.ru