Stabilization of Load Parameters Axial Deep Groove Ball Bearing

A.V. Korolev, A.A. Korolev, K.S. Neugebauer

Abstract


Cold rolling ball method can be used in the manufacture of hard thrust and radial bearings, regardless of their size, features and materials. Cold ball reeling significantly affects the performance of the bearings and as a result makes it more durable, and the node in which it operates, more stabilization technology operating parameters thrust bearings ball rolling raceway rings, which significantly improves the static load capacity of the bearing and reduce the time rolling resistance. A method for determining the rational conditions of the process rolling. In order to develop a methodology for calculating the geometric parameters of the thrust bearings were carried out special experimental studies. Due to the plastic deformation of the raceways formed on the surface of the local raceway width and profile radius of this path is equal to the local radius of the ball.

Full Text:

PDF

References


Korolev A.A. Matematicheskoe modelirovanie uprugih tel slozhnoj formy [Mathematical modeling of elastic bodies of complex shape], Saratov, SGTU Publ., 2001, 128 p.

Korolev A.V., Korolev An.A., Kolrolёv Al.A. Sovershenstvovanie tehnologii izgotovlenija tonkostennyh kolec podshipnikov [Improving the technology of thin-walled bearing rings], Saratov, SGTU Publ., 2004, 136 p.

Korolev A.V., Korolev A.A. Tochnaja holodnaja torco-vaja raskatka [Accurate cold end face Unrolling], Saratov SGTU Publ., 2003, 142 p.

Godunov V.B., Korolev A.A. Sposob raskatki detalej [Sposob rolling parts], Patent RU 2222392.

Korolev A.V., Sparrows R.V. New progressive technolo-gy for producing complex-blanks bearing rings of the tube rental [Novaya progressivnaya tekhnologiya polucheniya slozhnoprofilnykh zagotovok kolets podshipnikov iz trubnogo prokata], Tezisy dokladov Mezhdunarodnoy nauchno-tekhnicheskoy konferentsii “Sostoyaniye i perspektivy razvitiya elektrotekhnologii” [Abstracts of the International Scientific and Technical Conference "Status and prospects of development of electrotechnology"], Ivanovo, 2001, vol.1, p. 221.

Korolev A.V., Vorobyov R.V. Progressive technology for producing ring blanks from pipes-foot rental. [Novaja progres-sivnaja tehnologija poluchenija slozhnoprofil'nyh zagotovok kolec podshipnikov iz trubnogo prokata], Vestnik inzhenernoy Akademii Ukrainy [Bulletin of Engineering Academy of Ukraine], 2001, no.3, pp. 211-214.

Korolev A.V., Vorobyov R.V. Mathematical modeling of cold rolling [Matematicheskoe modelirovanie processa holodnoj raskatki], Dinamika tekhnologicheskikh sistem: trudy VI Mezhdunarodnoy nauchno-tekhnicheskoy konfer-entsii [The dynamics of technological systems: Proceedings of the VI International Scientific and Technical Conference], Rostov, 2001, vol. 1, pp. 55-59.

Korolev A.V., Polstyanov P.F., Kozin V.A., Atoyan W.R., Patent RU 2094158.

Korolev A.V., Efimov S.A., Merkulov A.A. Technology-processing of the final bearing races [Tehnologija okon-chatel'noj obrabotki dorozhek kachenija podshipnikov], Sov-remennyye materialy, tekhnika i tekhnologiya: 3-ya Mezhdu-narodnaya nauchnaya konferentsiya [Modern materials, equipment and technology: 3rd International Scientific Con-ference], Kursk, 2013.

Korolev A.V., Neugebauer K.S., Mukhina E.V. Drag torque thrust radial bearing [Moment soprotivlenija vrash-heniju uporno-radial'nogo podshipnika], Perspektivnoye razvitiye nauki, tekhniki i tekhnologiy: 3-ya Mezhdunarodnoy nauchno-prakticheskaya konferentsii [Prospective develop-ment of science, engineering and technology: 3rd Interna-tional Scientific and Practical Conference], Kursk, 2013, p. 161-165.

Korolev A.V., Filimonov E.V., Bolkunov V.V., Korolev A.A. Non-waste technology for manufacturing parts such as fittings rollers [Bezothodnaja tehnologija izgotovlenija detalej tipa fasonnyh valikov], Vestnik mashinostroyeniya [Bulletin of engineering], 2009, no. 12, pp. 74-76.

Korolev A.V., Korolev A.A., Vasin A.N. Highly efficient automated line precision cold rolling bearing rings [Vysoko-jeffektivnaja avtomatizirovannaja linija tochnoj holodnoj raskatki kolec podshipnikov], STIN, 2010, no. 4, pp. 38-40.

Korolev A.V., Neugebauer K.S. Manufacturing focus-but-radial bearings of small-size round bars [Tehnologija izgotovlenija uporno-radial'nyh podshipnikov iz malora-zmernogo kruglogo prokata], Sovremennyye materialy, tekhnika i tekhnologiya: 3-ya Mezhdunarodnaya nauchnaya konferentsiya [Modern materials, equipment and technology: 3rd International Scientific Conference], Kursk, 2013.

Chekushkin V.E., Ahmatov V.A., Mourashkin V.V., Bi-ryukov V.S. Sposob izgotovlenija naruzhnyh kolec shariko-podshipnikov [The method of manufacturing the outer rings of ball bearings], Patent RU 93029883, 1993.

Zaykov M.A., Mintz A.I., Aref'ev V.D., Pak A.V. In-strument dlja raskatki kol'cevyh zagotovok [Tool for rolling ring blanks], Patent RU 94028534, 1996.

Finagin P.M., Dzanashvili G.F., Podkustov V.P., Teren-tev D.V., Rodin N.M., Marin V.V. Sposob raskatki kolec [A method of rolling rings], Patent RU 2122482.

Nagovitcin V.V., Efimov A.M., Shagov V.S. Sposob izgotovlenija ploskih kolec [A method of manufacturing flat rings], Patent RU 2041003, 1995.

Adler Y.P. Planirovanie jeksperimenta pri poiske op-timal'nyh uslovij [Planning an experiment in the search for optimal conditions], Moscow, Science Publ., 1971.

Krivda K.T., Pshenishnyuk A.S., etc. Analiz rolling pro-cess flange [Analiz processa osadki s obkatkoj], Kiev, Vishcha shkola Publ., 1979, vol. 16, pp. 31-35.

Aslibekov V.A. Investigation of the effect of the para-meters of cold rolling on the geometric shape of the Rings [Is-sledovanie vlijanija parametrov holodnoj raskatki na ge-ometricheskuju formu kolec], Progressivnyye napravleniya razvitiya tekhnologii mashinostroyeniya: mezhvuzovskiy sbornik nauchnykh trudov [Progressive trends of develop-ment of engineering technology: Interuniversity collection of scientific papers], Saratov, SGTU Publ., 1996, pp. 120-124.

Aslibekov V.A., Goryunov A.V. Models plastic flows at rolling out obkatyvanii [Modeli plasticheskih techenij pri raskatke obkatyvaniem], Progressivnyye napravleniya razvitiya tekhnologii mashinostroyeniya: mezhvuzovskiy sbornik nauchnykh trudov [Progressive trends of develop-ment of engineering technology: Interuniversity collection of scientific papers], Saratov, SGTU Publ., 1997, pp. 69-73.

Aslibekov V.A. Diagram of the device for rolling bear-ing rings [Skhema ustroystva dlya raskatki kolets podshipni-kov], Progressivnyye napravleniya razvitiya tekhnologii mashinostroyeniya: mezhvuzovskiy sbornik nauchnykh trudov [Progressive trends of development of engineering technolo-gy: Interuniversity collection of scientific papers], Saratov, SGTU Publ., 1997, pp. 70-71.

Spiridonov A.A. Planirovaniye eksperimenta pri issle-dovanii tekhnologicheskikh protsessov [The design of exper-iments in the study of processes], Moscow, Mechanical Engi-neering Publ., 1981.




DOI: http://dx.doi.org/10.24892/RIJIE/20140314

Refbacks

  • There are currently no refbacks.


Copyright (c) 2016 A.V. Korolev, A.A. Korolev, K.S. Neugebauer

© Russian Internet Journal of Industrial Engineering. ISSN 2310-0818

E-mail: indust.engineering.ru@gmail.com

Another version of the web site: http://indust-engineering.ru