Investigation of the Aging Process of Cold-rolled and Hot Dip Galvanized Steel Sheet
Abstract
In this paper, a study was conducted of the aging process of cold and hot dip galvanized sheet to obtain data on the timing guarantees the mechanical properties of rolled metal production of OJSC Magnitogorsk Iron and Steel Works (MMK) during storage and processing of consumers.
Considered two basic types of aging, namely natural and artificial (deformation, thermal and thermodeformation).
For the experiment was selected following assortment: hot dip galvanized sheet steel grades DX52D and 08ps; cold-rolled sheet steel production 08U of rolling mill № 5; cold-rolled sheet of steel grades 08U and 10ps production of rolling mill № 11 "Magnitogorsk Iron and Steel Works."
The experimental part was carried out a tensile test to determine the change in mechanical properties as a result of the test assortment different types of aging. The experimental results were constructed depending that show changes in the mechanical properties and propensity to aging test sheet. It has been established that the supplier can store cold-rolled and hot dip galvanized sheet steel DX52D, 08U, 10ps in the warehouse for 3-6 months with guaranteed mechanical properties. Hot dip galvanized steel grade 08ps begins to age in 10 days.
In turn, straightening, unwinding rolls, as well as other actions with a sheet accompanied by heating and plastic deformation leads to a change in the mechanical properties of steel. It is necessary to consider both suppliers and consumers of products.
Full Text:
PDFReferences
Litvinenko D.A. Kholodnokatanaya nestareyushchaya stal [Cold-rolled timeless steel], Moscow, Metallurgiya, 1968, 168 p. (in Russ.)
Dedek V. Polosovaya stal dlya glubokoy vytyazhki [Steel strip for deep drawing], Moscow, Metallurgiya, 1970, 208 p. (in Russ.)
Ksenzuk F.A., Troshchenkov N.A., Chekmarev A.P., Safyan M.M. Prokat avtolistovoy stali [Rolling the automo-tive sheet steel], Moscow, Metallurgiya, 1969, 296 p. (in Russ.)
Odesskiy P.D., Vedyakov I.I. Malouglerodistyye stali dlya metallicheskikh konstruktsiy [Low carbon steel for metal structures], Moscow, Intermet Inzhiniring, 1999, 224 p. (in Russ.)
Babich V.K., Gul Yu.P., Dolzhenkov I.Ye. Defor-matsionnoye stareniye stali [Strain aging steel], Moscow, Metallurgiya, 1972, 320 p. (in Russ.)
Kalachev M.I. Deformatsionnoye uprochneniye metal-lov [Strain hardening of metals], Minsk, Nauka i tekhnika, 1980, 256 p. (in Russ.)
Kharitonov V.A., Radionova L.V., Safonov Ye.V. Strain aging of steel in the process of multiple drawing [Defor-matsionnoye stareniye stali v protsesse mnogokratnogo vo-locheniya], Sovremennyye tekhnologii i materialovedeniye: Mezhvuzovskiy sbornik nauchnykh trudov [Modern Technol-ogies and Materials: collection of scientific papers], Magni-togorsk, MGTU, 2003, pp. 263-267. (in Russ.)
Kharitonov V.A., Radionova L.V., Zaytseva M.V. Vliyaniye khimicheskogo sostava stali, rezhimov prokatki katanki i kholodnoy deformatsii na svoystva nizkouglero-distoy provoloki [The influence of the chemical composition of steel wire rolling modes and cold deformation on the prop-erties of low-carbon wire], Moscow, VINITI, 2005. (in Russ.)
Dovgopol V.I., Papulov B.N., Kukushkin V.M., Tara-sova A.A. GOST 14918-80. Stal tonkolistovaya otsinko-vannaya s nepreryvnykh liniy [Russian State Technical Standard 14918-80. Galvanized sheet steel with continuous lines], Moscow, 1987, 11 p. (in Russ.)
GOST 9045-93. Prokat tonkolistovoy kholodnoka-tanyy iz nizkouglerodistoy kachestvennoy stali dlya kholod-noy shtampovki [Russian State Technical Standard 9045-93. Cold-rolling sheet of low carbon quality steel for cold form-ing], Minsk, 1993, 11 p. (in Russ.)
GOST 16523-97. Prokat tonkolistovoy uglerodistoy stali kachestvennogo i obyknovennogo kachestva obshchego naznacheniya [Russian State Technical Standard 16523-97. Rolling thin sheet of carbon steel quality and ordinary quality, general purpose], Minsk, 1997, 11 p. (in Russ.)
DIN EN 10142-2000. Listy i polosy nepreryvnogo goryachego tsinkovaniya iz nizkouglerodistykh staley dlya kholodnogo deformirovaniya [Sheets and strips of continuous hot-dip galvanizing of low carbon steels for cold forming]. (in Russ.)
EN 10346-2009. Ploskaya stalnaya produktsiya s nepreryvnym goryachim pokrytiyem. Tekhnologicheskiye usloviya [Flat steel products with continuous hot finish. Tech-nological conditions]. (in Russ.)
Benyakovskiy M.A., Maslennikov V.A. Avtomobilna-ya stal i tonkiy list [Automotive steel and a thin sheet], Cherepovets, Izdatelskiy dom Cherepovets, 2007, 636 p. (in Russ.)
Benyakovskiy M.A., Mazur V.L., Meleshko V.I. Pro-izvodstvo avtomobilnogo lista [Production of automobile sheet], Moscow, Metallurgiya, 1979, 256 p. (in Russ.)
Ovsyannikov B.M., Aleshkin F.I., Chebotarev V.I. GOST 10510-80. Metally. Metod ispytaniya na vydavlivaniye listov i lent po Eriksenu [Russian State Technical Standard 10510-80. Metals. Test method for extruding sheets and tapes Erichsen], Moscow, 1993, 6 p. (in Russ.)
Paramonov V.A., Levenkov V.V. Production of auto-motive sheet coated [Proizvodstvo avtomobilnogo lista s pokrytiyami], Sovremennyye dostizheniya v metallurgii i tekhnologii proizvodstva staley dlya avtomobilnoy promysh-lennosti: trudy mezhdunarodnogo seminara [Modern ad-vances in metallurgy and steel production technology for the automotive industry: Proceedings of the International Semi-nar], Moscow, 2004, pp. 226-229.
Mushenborn W., Steinhorts M. Coated steel sheet – facing automotive challenges, Sovremennyye dostizheniya v metallurgii i tekhnologii proizvodstva staley dlya avtomo-bilnoy promyshlennosti: trudy mezhdunarodnogo seminara [Modern advances in metallurgy and steel production tech-nology for the automotive industry: Proceedings of the Inter-national Seminar], Moscow, 2004, pp. 206-225.
Matorin V.I., Ovsyannikov B.M., Khromov V.D., Birun N.A., Chebotarev V.I. et al. GOST 1497-84. Metally. Metody ispytaniy na rastyazheniye [Russian State Technical Standard 1497-84. Metals. Test Methods Tensile], Moscow, 2008, 22 p. (in Russ.)
GOST 11701-84. Metally. Metod ispytaniy na rastya-zheniye tonkikh listov i lent [Russian State Technical Stand-ard 11701-84. Metals. Test Method Tensile thin sheets and strips], Moscow, 1986, 10 p. (in Russ.)
DOI: http://dx.doi.org/10.24892/RIJIE/20150206
Refbacks
- There are currently no refbacks.
Copyright (c) 2016 L.V. Radionova, Yu.M. Subbotina
© Russian Internet Journal of Industrial Engineering. ISSN 2310-0818
E-mail: indust.engineering.ru@gmail.com
Another version of the web site: http://indust-engineering.ru