Modernization of technological line preparation of the sinter burden to sintering process at JSC "Ural Steel"

Aleksey Shapovalov, Elena Ovchinnikova

Abstract


The analysis of the operating conditions and results of sinter production at JSC "Ural Steel" was made. The conditions for the preparation of sinter burden to sintering process were analyzed. The basic technical and technological factors limiting the performance of sinter production was established. In this article was offered technical measures to modernize technological line preparation of sinter burden: improving training schemes burnt lime and coke breeze, upgrade equipment for mixing and pelletizing. In terms a limit of material resources to retool, special attention should be paid to improving the preparation technology of the sinter burden because such directions as optimization of granulometric composition of burnt lime and coke breeze, as well as improved binding properties of water, supplied when moisten, by the addition of surfactants.


Full Text:

PDF

References


Zaloznaya L.A., Shapovalov A.N. Getting high-quality sinter in conditions of the sinter plant of “Ural Steel” [Polu-cheniye vysokokachestvennogo aglomerata v usloviyakh aglomeratsionnogo tsekha OAO “Uralskaya stal”], Nauka i proizvodstvo Urala [Science and Industry of the Urals], No-votroitsk, NF MISiS, 2006, vol. 2, pp.31-34.

Titova I.A., Shapovalov A.N. Optimization of technolo-gy sinter production at JSC “Ural Steel” [Optimizatsiya tekhnologii proizvodstva aglomerata v usloviyakh OAO “Uralskaya stal”], Nauka i proizvodstvo Urala [Science and Industry of the Urals], Magnitogorsk, Magnitogorsk state tehn. University named after G.I. Nosov, 2011, vol. 7, pp.14-24.

Salnikov I.M., Pazyuk M.Yu. Improved stability of the preparation of iron ore materials to agglomeration [Pov-ysheniye stabilnosti podgotovki zhelezorudnykh materialov k okuskovaniyu], Metallurgicheskaya i gornorudnaya promyshlennost [Metallurgical and Mining Industry], 1991, no.1, pp.1-2.

Lepikhin L.A., Aleshin A.A., Yusupov R.B., Polushkin M.E. Improving the efficiency of mixing sinter burden [Pov-ysheniye effektivnosti smeshivaniya agloshikhty], Chernaya metallurgiya. Byulleten nauchno-tekhnicheskoy informatsii [Ferrous metallurgy. Bulletin of Science and Technology Information], 1992, no.11, pp. 29-30.

Vegman Ye.F. Okuskovaniye rud i kontsentratov [Ag-glomeration ores and concentrates], Moscow, Metallurgy, 1968, 258 p.

Korotich V.I., Frolov Yu.A., Bezdezhskiy G.N. Aglomer-atsiya rudnykh materialov [Agglomeration of ore materials], Ekaterinburg, Ural State Technical University, 2003. 400 p.

Kolesanov F.F., Khlaponin N.S., Krivosheyev V.N., Chikurov V.I. Sovershenstvovaniye aglomeratsionnogo protsessa [Improvement of the sintering process], Kiev, Tech-nology, 1983, 110 p.

Krizhevskiy A.Z., Rudovskiy G.I., Kamyshnyy Yu.A. et al. Effect of granulometric composition the sintered burden on flow rate of coke breeze in the sintering process [Vliyaniye granulometricheskogo sostava spekayemoy shikhty na raskhod aglomeratsionnogo topliva], Metallurgicheskaya i gornorudnaya promyshlennost [Metallurgical and Mining Industry], 1992, no.1, pp. 4-6.

Pazyuk M.Yu., Pogorelov V.N., Grankovskiy V.I. et al. Influence the quality of burden on the strength of sinter [Vliyaniye kachestva podgotovki shikhty na prochnost aglomerata], Izvestiya vuzov. Chernaya metallurgiya [Trans. Iron and steel], 1985, no.4, pp. 21-24.

Mishchenko I.M., Kochura V.V., Aslamova Ya.Yu. et al. Improving technology and equipment sinter production [Sovershenstvovaniye tekhnologii i oborudovaniya aglomer-atsionnogo proizvodstva], Metallurgicheskiye protsessy i oborudovaniye [Metallurgical processes and equipment], 2011, no.3, pp. 35-44.

Komornikov G.I., Konev V.I., Butivchenko V.N. et al. Mixing efficiency of the sinter burden [Effektivnost smeshi-vaniya aglomeratsionnykh shikht], Stal [Steel], 1972, no.7, pp. 580-582.

Zhilkin V.P., Doronin D.N. Proizvodstvo aglomerata. Tekhnologiya, oborudovaniye, avtomatizatsiya [Sinter pro-duction. Technology, equipment, automation], Ekaterinburg, Ural Center PR and advertising, 2004, 292 p.

Korotich V.I. Teoreticheskiye osnovy okomkovaniya zhelezorudnykh materialov [Theoretical bases of pelletizing iron ore materials], Moscow, Metallurgy, 1966, 152 p.

Frolov Yu.A., Ptichnikov A.G., Barinov V.Kh., Gorshkov N.N. Investigation of the sintering process for the upgraded sinter plant number 2 of "CMP" with cooling sinter on sintermachines [Issledovaniye protsessa aglomeratsii dlya moderniziruyemoy aglomeratsionnoy fabriki №2 OAO "ChMK" s okhlazhdeniyem aglomerata na aglomer-atsionnykh mashinakh], Chernaya metallurgiya. Byulleten nauchno-tekhnicheskoy i ekonomicheskoy informatsii [Fer-rous metallurgy. Bulletin of scientific, technical and econom-ic information], 2010, no.2, pp.8-17.

Korotich V.I. Osnovy teorii i tekhnologii podgotovki syrya k domennoy plavke [Basic theory and technology of preparation of raw materials to the blast furnace], Moscow, Metallurgy, 1978, 208 p.

Bershteyn R.S. Povysheniye effektivnosti aglomeratsii [Improving the efficiency of sintering], Moscow, Metallurgy, 1979, 144 p.

Gurin P.I., Khlaponin N.S., Osipenko A.M. Efficiency lime application in sintering burden with high basicity [Effek-tivnost primeneniya izvesti pri aglomeratsii shikhty vysokoy osnovnosti], Stal [Steel], 1981, no.9, pp. 9-12.

Minakov N.S., Kretinin V.I., Gorbachev V.P., Arykov G.A. Investigation of the influence of input methods lime to the sinter burden on the results of the sintering process [Issle-dovaniye vliyaniya razlichnykh sposobov vvoda izvesti v shikhtu na pokazateli protsessa aglomeratsii], Stal [Steel], 1988, no.9, pp, 5-8.

Kukhar A.S., Martynenko V.A., Shevchenko V.P. Pro-izvodstvo i kachestvo aglomerata [Production and quality of sinter], Moscow, Metallurgy, 1977, 160 p.

Ozhogin V.V. Methods for producing granules, and their effect on the process of sintering, and the mechanical properties of sinter [Sposoby polucheniya granul i vliyaniye ikh dobavok na protsessy spekaniya i mekhanicheskiye svoystva aglomerata], Metallurgicheskiye protsessy i obo-rudovaniye [Metallurgical processes and equipment], 2006, no.3, pp. 19-24.

Sibagatullin S.K., Ivanov A.V., Reshetnikova I.V. The use of organic binders in sintering process of iron ore resources [Primeneniye organicheskikh svyazuyushchikh komponentov v protsesse aglomeratsii zhelezorudnogo syrya], Vestnik MGTU im. G.I. Nosova [Bulletin of MSTU named after G.I. Nosov], 2010, no.4, pp. 30-32.




DOI: http://dx.doi.org/10.24892/RIJIE/20130205

Refbacks

  • There are currently no refbacks.


Copyright (c) 2016 Aleksey Shapovalov, Elena Ovchinnikova

© Russian Internet Journal of Industrial Engineering. ISSN 2310-0818

E-mail: indust.engineering.ru@gmail.com

Another version of the web site: http://indust-engineering.ru