Calculation of the Reference Areas Cutting Profiles Taps

I.V. Ivanina

Abstract


To tap a mathematical model for determining the reference area elementary cutting profiles allowing for the kinematics of cutting and shaping the location of items on the cutting part of the tool. Resulting in an analytical form the variation of the reference area of the cutting profiles as a set of values of axial movement of the tool allows you to calculate the pressure on the contact surfaces of a threaded nut tap couple. Calculated scheme for determining the elementary bearing surfaces of the cutting profiles. The charts of change of the accumulated supporting area are as an example built as far as the threading-in of cutting part of marker for the different sizes of back off of back surface of tooth. The equations of the contact areas of the thread pairs allow for analysis of the structure and geometry of the cutting tool from the point of view of the possibility of stabilizing the value of a breakdown in the first turns of thread cutting.


Full Text:

PDF

References


Matveev V.V. Narezaniye tochnykh rezb [Cutting fine thread], Moscow, Mashinostroenie, 1978, 85 p. (in Russ.)

Ivanina I.V. Influence of parameters of the cutting part of the tap on the accuracy of threading [Vliyaniye par-ametrov rezhushchey chasti metchika na tochnost narezani-ya rezby], Izmeritelnaya tekhnika [Measuring equipment], 2005, no.10, pp. 38-41. (in Russ.)

Ivaninа I.V. Compensation of axial component of the cutting force when tapping, Russian Internet Journal if Indus-trial Engineering, 2014, vol. 2, no.3, pp. 1-5. (in Russ.)

Dobryansky S.S. Forces of cutting and accuracy at threading grooves by heads [Sili i tochnist pri narizuvanni rizb golovkami], Vіsnik Natsіonalnogo tekhnіchnogo-unіversitetu Ukraїni “Kiїvskiy polіtekhnіchniy іnstitut”, Serіya: Mashi-nobuduvannya [Proceedings of the National Technical Uni-versity of Ukraine “Kyiv Polytechnic Institute” Series: Me-chanical Engineering], 2012, no.66, pp. 43-46. (in Ukrain.)

Ananiev A.S., Serov V.P. Mathematical model of tap-ping. [Matematicheskaya model protsessa narezaniya rezby metchikom], Tekhnologiya mashinostroyeniya [Mechanical Engineering Technology], 2008, no.4, pp. 67-68. (in Russ.)

Ananiev A.C., Zemlyanskiy M.S. Impact intake cone angle of the tap on the cutting force and the carrying capacity of supporting the edges of the thread [Vliyaniye ugla zabornogo konusa metchika na silu rezaniya i nesushchuyu sposobnost opornykh kromok profilya rezby], Izvestiya Vol-gogradskogo gosudarstvennogo tekhnicheskogo universiteta [News of Volgograd State Technical University], 2010, vol. 6, no.12(72), pp. 6-7. (in Russ.)

Markov A.M., Lebedev P.V. Definition torque values for tapping into the high strength composite polymer materials [Opredeleniye velichiny krutyashchego momenta pri narezanii vnutrenney rezby v vysokoprochnykh kompozitsionnykh polimernykh materialakh], Obrabotka metallov [Metal Pro-cessing], 2011, no.1, pp. 8-11. (in Russ.)

Lopuhov V.P. The methodology for calculating the axi-al undercut tapping [Metodika rascheta osevykh podrezaniy rezb metchikami], STIN [STIN], 2009, no.7, pp. 39-40. (in Russ.)

Shagun V.I. Effect settings tap on the surface roughness of the thread, cut machine taps [Vliyaniye parametrov metchika na sherokhovatost poverkhnostey rezby, narezayemoy mashinnymi metchikami], Issledovaniya v ob-lasti tekhnologii obrazovaniya rezb, rezboobrazuyushchikh instrumentov, stankov i metodov kontrolya rezb [Research in the field of education technology threads, threading tools, machine tools and inspection techniques thread], Tula, 1980, pp. 48-58. (in Russ.)

Ivanina I.V. Simulation model for generating scheme of threading, Garold of BMSTU mechanical engineering, 2002, no.4, pp. 56-68. (in Russ.)




DOI: http://dx.doi.org/10.24892/RIJIE/20160408

Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 I.V. Ivanina

© Russian Internet Journal of Industrial Engineering. ISSN 2310-0818

E-mail: indust.engineering.ru@gmail.com

Another version of the web site: http://indust-engineering.ru