Automated Laboratory Drawing Mill DUO-130
Abstract
Full Text:
PDFReferences
Radionova L.V., Shekunov E.V. Materialovedenie. Tekhnologiya konstrukcionnyh materialov [Materials Science. Technology of constructional materials], Magnitogorsk, MGTU, 2010, 217 p. (in Russ.)
Fetisov G.P., Karpman M.G., Matyunin V.M. et al., Fetisova G.P. (Ed.) Materialovedenie i tekhnologiya metallov [Material Science and Technology of Metals: A Textbook for Universities], Moscow, Higher education school, 2001, 638 p. (in Russ.)
Sarapulov O.A., Radionova L.V. Automatic control system for the cooling process on a hot-rolled mill [Sistema avtomaticheskogo upravleniya protsessom okhlazhdeniya na sortovom stane goryachey prokatki], Izvestiya vysshikh uchebnykh zavedeniy. Elektromekhanika [Scientific and Technical Journal. Russian Electromechanics], 2009, pp. 94-98. (in Russ.)
Radionov A.A. Avtomatizirovannyj ehlektroprivod sovmeshchennogo prokatno-volochil'nogo stana: osnovnye zadachi i napravleniya razrabotki [Automated electric drive of a combined rolling mill: the main tasks and directions of development], Vestnik magnitogorskogo gosudarstvennogo tekhnicheskogo universiteta im. G.I. Nosova [MGTU], 2006, pp. 55-58. (in Russ.)
Tomlenov A.D. Teoriya plasticheskogo deformirovaniya metallov [Theory of plastic deformation of metals], Moscow, Metallurgy, 1972, 408 p. (in Russ.)
Tselikov A.I., Polukhin P.I., Grebenik V.M. Mashiny i agregaty metallurgicheskih zavodov [Machines and units of metallurgical plants], Moscow, Metallurgy, 1987, 440 p. (in Russ.)
Kharitonov V.A., Taranin I.V. Comparative analysis of stress state of metal during continuous rolling and rolling-pressing [Sravnitel'nyj analiz napryazhennogo sostoyaniya metalla pri prodol'noj prokatke i prokatke-pressovanii], Stal' [Steel], 2014, pp. 28-61. (in Russ.)
Kalachev M.I. Deformacionnoe uprochnenie metallov [Deformation hardening of metals], Minsk, Science and Technology, 1980, 256 p. (in Russ.)
Korolev A.A. Mekhanicheskoye oborudovaniye prokatnykh i trubnykh tsekhov [Mechanical equipment rolling and pipe shops], Moscow, Metallurgy, 1987, 480 p. (in Russ.)
Krokha V.A. Krivyye uprochneniya metallov pri kholodnoy deformatsii [Curves of hardening of metals by cold deformation], Moscow, Mashinostroyeniye, 1968, 131 p. (in Russ.)
Lukashkin N.D., Kokhan L.S., Yakushev A.M. Konstruktsiya i raschet mashin i agregatov metallurgicheskikh zavodov [Design and calculation of machines and units of metallurgical plants], Moscow, Akademkniga, 2003, 456 p. (in Russ.)
Radionov А.А., Karandaev A.S., Evdokimov A.S. et al. Mathematical Modelling of the Interrelated Electric and Mechanical Systems of Continuous Sub-Group of the Rolling Mill Stands. Part 1. Development of the Mathematical Model, Bulletin of the South Ural State University. Ser. Power Engineering, 2015, vol.15, no.1, pp. 59-73. (in Russ.) DOI: 10.14529/power150108
DOI: http://dx.doi.org/10.24892/RIJIE/20170406
Refbacks
- There are currently no refbacks.
Copyright (c) 2018 L. V. Radionova, S. R. Faizov, R. A. Lisovskiy, T. A. Lisovskaya, M. A. Zhludov, A. V. Makarov
© Russian Internet Journal of Industrial Engineering. ISSN 2310-0818
E-mail: indust.engineering.ru@gmail.com
Another version of the web site: http://indust-engineering.ru