Study of Tribological Properties of Ceramic-Matrix Composites Paired with Cermet

A. P. Garshin, V. I. Kulik, A. S. Nilov

Abstract


Results are provided for an experimental study of tribological properties of ceramic-matrix composites with a silicon carbide matrix, reinforced with carbon fibers of different composition, prepared by liquid-phase siliconizing technology, with sliding friction in a pair with a counterbody from friction cermets based on iron and copper with various ceramic additions

Full Text:

PDF

References


Krenkel W. C/C-SiC Composites for Hot Structures and advanced Friction Systems, Ceram. Eng. Sci. Proc., 2003, Vol.24 (4), pp. 583-592. DOI: 10.1002/9780470294826.ch85

Licciulli A., Chiechi A., Diso D., Maffezzoli A. Ceramic Composites for Automotive Friction Devices, Advances in Science and Technology, 2006, vol.45, pp. 1394-1398. DOI: 10.4028/www.scientific.net/AST.45.1394

Narottam P. Bansal (Ed.) Hanbook of ceramic composites, Boston, Dordrecht, London, Kluver Academic Publishers, 2005, 554 p.

Kermc M., Kalin M., Vizintin J. Development and use of an apparatus for tribological evaluation of ceramic-based brake materials, Wear, 2005, vol. 259, pp. 1079–1087. DOI: 10.1016/j.wear.2004.12.002

Kulik V.I., Nilov A.S., Garshin A.P. et al. Obtaining, application and properties of friction composite materials with a carbide-silicon matrix [Poluchenie, primenenie i svoystva friktsionnykh kompozitsionnykh materialov s karbidokremnievoy matritsey], Materialy dokladov Mezhdunarodnogo spetsializirovannogo nauchno-tekhnicheskogo seminara "Kompozitsionnye friktsionnye materialy: svoystva, proizvodstvo, primenenie" [Proceedings of the reports of the International Specialized Scientific and Technical Seminar "Composite friction materials: properties, production, application"], Minsk, 2008, pp. 45-57. (in Russ.)

Ilyushchenko A.F., Syroezhko G.S., Dmitrovich A.A. et al. Current state of production of sintered friction products in Belarus [Sovremennoe sostoyanie proizvodstva spechennykh friktsionnykh izdeliy v Belarusi], Materialy dokladov Mezhdunarodnogo spetsializirovannogo nauchno-tekhnicheskogo seminara "Kompozitsionnye friktsionnye materialy: svoystva, proizvodstvo, primenenie" [Proceedings of the reports of the International Specialized Scientific and Technical Seminar "Composite friction materials: properties, production, application"], Minsk, 2010, pp. 8-13. (in Russ.)

Kulik V., Nilov A., Rumyantsev V. et al. Microstructure and Properties of 2D-Cf/C-SiC (Si) Composites Prepared by the Silicon Melt Infiltration Process, Abstracts book International Conferences on modern materials and technologies (CIMTEC 2006), Acireale, Italy, 2006, 193 p.

Fedorchenko I.M., Kryachek V.M., Panahioti I.I. Sovremennye friktsionnye materialy [Modern friction materials], Kiev, Naukova Dumka, 1975, 334 p. (in Russ.)

Dmitrovich A.A., Shpitsa N.A. Features of the formation and destruction of the surface layer of sintered powder friction materials with various ceramic additives in friction [Osobennosti formirovaniya i razrusheniya poverkhnostnogo sloya spechennykh poroshkovykh friktsionnykh materialov s razlichnymi keramicheskimi dobavkami pri trenii], Materialy dokladov Mezhdunarodnogo spetsializirovannogo nauchno-tekhnicheskogo seminara "Kompozitsionnye friktsionnye materialy: svoystva, proizvodstvo, primenenie" [Proceedings of the reports of the International Specialized Scientific and Technical Seminar "Composite friction materials: properties, production, application"], Minsk, 2010, pp. 47-57. (in Russ.)

Dmitrovich A.A., Shipitsa N.A. Investigation of the influence of ceramic inclusions on the tribotechnical properties of friction materials on an iron basis [Issledovanie vliyaniya keramicheskikh vklyucheniy na tribotekhnicheskie svoystva friktsionnykh materialov na zheleznoy osnove], Trudy 6-go mezhdunarodnogo simpoziuma po friktsionnym izdeliyam i materialam (YaROFRI 2006) [Proceedings of the 6th International Symposium on Friction Products and Materials (JAROFRI 2006)], Yaroslavl, 2006, pp. 131-137. (in Russ.)

Savich V.V., Dyachkova L.N., Shipitsa N.A. et al. Spechennye poroshkovye materialy: metody i pribory kontrolya svoystv iskhodnykh poroshkov, issledovaniya struktury i ekspluatatsionnykh kharakteristik izdeliy iz nikh [Sintered powder materials: methods and devices for controlling the properties of raw powders, researching the structure and performance characteristics of products from them], Minsk, Geoprint, 2008, 318 p. (in Russ.)

G.H. Jang, K.H. Cho, S.B. Park et al. Tribological Properties of C/C-SiC Composites for Brake Discs, Met. Mater. Int., 2010, vol.16, no.1, pp. 61-66. DOI: 10.1007/s12540-010-0061-4




DOI: http://dx.doi.org/10.24892/RIJIE/20170303

Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 A. P. Garshin, V. I. Kulik, A. S. Nilov

© Russian Internet Journal of Industrial Engineering. ISSN 2310-0818

E-mail: indust.engineering.ru@gmail.com

Another version of the web site: http://indust-engineering.ru