Comparative Study of High-Chromium Cast Iron Coatings Modified with WC-W2C/Co+B4C+Ni/Al Complexes and Cr3C2/PG-US25 Ceramet

A. V. Shchegolev, A. V. Ishkov, V. V. Ivanayskiy

Abstract


The article describes the preparation and comparative wear resistance testing of Fe-Cr-C- (B) coating materials, intended to harden the working bodies of agricultural machines using high-performance method of inductive surfacing, and contains the results of microstructure analysis of such coatings. These coatings are made of powder compositions based on PG-US25 high-chromium cast iron and borate flux for inductive surfacing of P-0.66 grade, modified with W, B, Cr carbides in amounts from 2...5 to 25...30 wt.%, which can be applied to machine’s elements without significant technology changes. Modifying agents were commercial products (WC-W2C / Co spherical cast tungsten carbide, B4C abraser).

The article demonstrates that the injection of these complexes into the fusion mixture for inductive surfacing can increase their hardness (up to 1000...1200 HV100) and wear resistance of the surfacing metal 3.1...4.5 times compared to the base metal (65G steel), and 1.3...1.8 times compared to the base material. The observed changes in coatings characteristics are explained by Charpy effect, dispersion hardening and the formation of new phases in the coatings (boride eutectics).


Full Text:

PDF

References


Kragelsky I.V., Alisina V.V. (eds.) Trenie, iznashivanie i smazka: spravochnik [Friction, wear and lubrication: a handbook, in 2 books. Book. 1], Moscow, Mechanical Engineering, 1978, 400 p. (in Russ.)

TkachevV.N. Iznos i povyshenie dolgovechnosti detaley sel'skokhozyaystvennykh mashin [Wear and durability of parts of agricultural machinery], Moscow, Mashinostroenie, 1971, 264 p. (in Russ.)

IshkovA.V., Ivanaysky V.V., Krivochurov N.T. Kompozitnye pokrytiya sistemy Fe-Cr-C-B dlya uprochneniya detaley mashin [Composite coatings of the Fe-Cr-C-B system for hardening machine parts], Saarbrucken, LAP LAMBERT, 2014, 286 p. (in Russ.)

Naplavochnye materialy stran-chlenov SEV: katalog [Surviving materials of the member states of the CMEA: catalog], Kiev, Moscow, VINITI 1-619, 1979. (in Russ.)

Laird G., Gundlach R., R?hrig K. Abrasion-resistant cast iron, Handbook Ed. American Foundry Society. – Schaumburg, USA, 2000.

Hasui A., Morigaki O. Naplavka i napylenie [Surfacing and Sputtering], Trans. with Japanese V.N. Popova, Moscow, Mechanical Engineering, 1985, 240 p. (in Russ.)

Tkachev V N. Induktsionnaya naplavka tverdykh splavov [Induction hardfacing of hard alloys], Moscow, Mechanical Engineering, 1970, pp. 183 p. (in Russ.)

Zum К., Eldis G. Abrasive wear of white cast irons, Wear, 1980, vol. 64, pp. 175-194. DOI: 10.1016/0043-1648(80)90101-5

Kazamer N., Pascal D., Marginean G. et al. A сomparison between hardness, corrosion and wear performance of APS-Sprayed WC-CoMo and WC-Co coatings, Solid State Phenomena, 2016, vol. 254, pp. 71-76. DOI: 10.4028/www.scientific.net/SSP.254.71

Ryabtsev I.A., Panfilov A.I., Babinets A.A., Ryabtsev I.I., Gordan G.N., Babijchuk I.L. Structure and abrasive wear resistance of deposited metal hardened with carbides of different types [Struktura i iznosostoykost' pri abrazivnom iznashivanii naplavlennogo metalla, uprochnennogo karbidami razlichnykh tipov], Avtomaticheskaya svarka [The Paton Welding J.], 2015, no. 5-6 pp. 78-82. DOI: 10.15407/tpwj2015.06.17

Sahraoui T., Fenineche N.-E., Montavon G., Coddet C. Structure and wear behaviour of HVOF-sprayed Cr3C2–NiCr and WC–Co coatings, Materials & Design, 2003, №24, рр. 309-313. DOI: 10.1016/S0261-3069(03)00059-1

Poovazhagan L., Jeffrey H., Thomas M. Selvaraj Microstructure and Abrasive Wear Behavior of Copper–Boron Carbide Nanocomposites, Advances in Materials and Metallurgy, Lecture Notes in Mechanical Engineering, Switzerland, Springer International Publishing, 2018, pp. 47-55. DOI: 10.1007/978-981-13-1780-4_6

Ivanov S.G., Garmaeva I.A., Guriev M.A. et al. Features of Multicomponent Saturation Alloyed by Steels, Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering, Switzerland, Springer International Publishing, 2015, pp. 49-54. DOI: 10.1007/978-3-319- 15684-2_7

Okovityi V.A. Plasma wear-resistant coatings with inclusions of a solid lubricant, Welding International, 2002, vol. 16, issue. 11, pp. 918-920. DOI: 10.1080/09507110209549638

Krivochurov N.Т., Ivanaysky V.V., Ishkov A.V., Schegolev A.V. About the efficiensy of various hardening methods the knives of the chopper straw spreader of combine harvester [Ob effektivnosti razlichnykh variantov uprochneniya nozhey izmel'chitelya-razbrasyvatelya solomy zernouborochnogo kombayna], Vestnik Altayskogo gosudarstvennogo agrarnogo universiteta [Bulletin of the Altai State Agrarian University],2018, №9(167). (in Russ.)

Shchegolev A.V., Aulov V.F., Ishkov A.V. et al. Modification of wear-resistant coatings of Fe-Cr-C system based on the Cr3C2 obtained with help of SHS method, IOP Conference Series: Materials Science and Engineering, 2018, vol. 441, № 012047. DOI: 10.1088/1757-899X/441/1/012047

Koizumi M. (ed.) Khimiya sinteza szhiganiem [Chemistry of Synthesis of Combustion], Moscow, World, 1998, 247 p. (in Russ.)

Zhurda A.P. Tungsten carbide based cladding materials [Naplavochnye materialy na osnove karbidov vol'frama], Avtomaticheskaya svarka [The Paton Welding Journal], 2014, no. 6-7, С. 69-74. DOI: 10.15407/tpwj2014.06.13

Massalski T.B., Okamoto H., Subramanian P.R., Kacprzak L. Binary Alloy Phase Diagrams, ASM International, Materials Park, 1990.

Mishustin N.M., Ivanaysky V.V., Ishkov A.V. Composition, structure and properties of wear resistant coatings obtained at 65g and 50hga steels at highspeed rfcborating process [Sostav, struktura i svoystva iznosostoykikh pokrytiy, poluchennykh na stalyakh 65G i 50KhGA pri skorostnom TVCh-borirovanii], Izvestiya Tomskogo politekhnicheskogo universiteta [Bulletin of the Tomsk Polytechnic University], 2012, vol. 320, no. 2, pp. 68-72. (in Russ.)

Portnoi K.I., Levinskaya M.K., Romashov V.M. Constitution Diagram of the System Iron-Boron, Sov. Powder Metall. Met. Geram. – 1969. – no.8. – pp. 657-659. DOI: 10.1007/bf00775428




DOI: http://dx.doi.org/10.24892/RIJIE/20190203

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 A. V. Shchegolev, A. V. Ishkov, V. V. Ivanayskiy

© Russian Internet Journal of Industrial Engineering. ISSN 2310-0818

E-mail: indust.engineering.ru@gmail.com

Another version of the web site: http://indust-engineering.ru