Additive Technologies in Prototyping Parts of Binocular

M. D. Svinarev, N. A. Chichenev


An overview of prototyping methods available for small businesses is provided. Prototyping is carried out using two types of 3D printing: SLA and FDM. Through the above printing methods, operable structural elements of the head of a binocular were obtained. The final prototype was assembled, during which a number of defects in the obtained parts were revealed, such as insufficient product strength and low manufacturing accuracy when using FDM technology. These defect are taken into account in future versions of parts with the refinement and modification of existing CAD models. Also, an analysis of the time and material costs of the production of elements of the prototype. The materials are presented showing the differences between the virtual CAD model and its implementation in the material.

Full Text:



Gibson I., Rosen D., Stucker B. Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing, Berlin, SpringerVerlag, 2015, 498 p.

Brian Evans. Practical 3D Printers: The Science and Art of 3D Printing, Apress, 2012, 332 p.

Todd Zaki Warfel. Prototipirovanie: prakticheskoe rukovodstvo [Prototyping: a practical guide], Moscow, Mann, Ivanov and Ferber Publishing House, 2013, 240 p. (in Russ.)

Akhtyamova G.R., Zarapin A.Yu., Sedykh L.V. The introduction of additive technologies in mechanical engineering. Review and analysis of methods and technologies of layer-by-layer prototyping Engineering of technological equipment and processes [Vnedrenie additivnykh tekhnologiy v mashinostroenie. Obzor i analiz metodov i tekhnologiy posloynogo prototipirovaniya Inzhiniring tekhnologiche-skogo oborudovaniya i protsessov], Sbornik nauchnykh trudov studentov i aspirantov NITU "MISiS" [Collection of scientific works of undergraduate and post-graduate students of NUST "MISiS"], Kirov, 2018. pp. 76-85. (in Russ.)

a62f8d4b563AT_liteynoedelo.pdf (accessed 26 March 2018). -sinteza-sdelano-v-rossii.html (accessed 12.01.2017).

Wolfson S.A. ABS-plastik: khimicheskaya entsiklo-pediya: v 5 t. [ABS plastic: chemical encyclopedia: 5 volumes], Moscow, Soviet Encyclopedia (T. 1-2): Great Russian Encyclopedia (T. 3-5), 1988-1998. (in Russ.)

Ilyushenko N.V., Ulanovich A.V., Seleznev V.A. 3D computer technology and prototyping in the development and manufacture of models of technical devices [Komp'yuternye 3D tekhnologii i prototipirovanie pri razrabotke i izgotovlenii modeley tekhnicheskikh ustroystv], Nauchnoe soobshchestvo studentov XXI stoletiya: materialy III studencheskoy mezhdunarodnoy zaochnoy nauchno prakticheskoy konferentsii [Scientific community of students of the XXI century: materials of the III student international correspondence scientific and practical conference. Part IV], Novosibirsk, Publishing House "Siberian Association of Consultants", 2012, pp. 147-153. (in Russ.)



  • There are currently no refbacks.

Copyright (c) 2020 M. D. Svinarev, N. A. Chichenev

© Russian Internet Journal of Industrial Engineering. ISSN 2310-0818


Another version of the web site: