Study of the Features of Damage Accumulation in Steel 12Cr18Ni10Ti at Low Temperatures Using Non-Destructive Testing Methods

A. A. Khlybov, M. S. Anosov, D. A. Ryabov

Abstract


The paper considers the features of damage accumulation during fatigue loading of 12Cr18Ni10Ti steel, in particular at low temperatures. The character of changes in the magnetic and acoustic characteristics, as well as the index of the fractal dimension of microstructures during the accumulation of damage to the metal structure, is studied. The correlation of the considered indicators is shown, which indicates the possibility of using indicators such as the acoustic parameter, magnetic characteristics (Hc / Br ratio, as well as the coercive force Hc) and the fractal dimension of the metal microstructure to assess structural damage, such as in laboratory conditions, and during the operation of individual parts and structural elements in a wide range of low temperatures. The use of the considered indicators in the complex will significantly increase the accuracy of forecasting metal damage and its residual life

Full Text:

PDF

References


Terentyev V.F., Korableva S.A. Ustalost' metallov [Fatigue of metals], Moscow, Nauka, 2015, 484 p. (in Russ.)

Finkel V.M. Fizika razrusheniya: rost treshchin v tverdykh telakh [Fracture physics: crack growth in solids], Moscow, Metallurgy, 1970, 376 p. (in Russ.)

Klinenko A.P., Novikov N.V., Smolensky B.L. et al. Kholod v mashinostroenii [Cold in mechanical engineering], Moscow, Mashinostroenie, 1969, 248 p. (in Russ.)

Kabaldin Y.G., Anosov M.S., Shatagin D.A. et al. Fa-tigue failure at low temperatures, Russ. Engin. Res., 2017, no.37, pp. 866-873. DOI: 10.3103/s1068798x17100124

Semashko O.N., Maryin B.N. et al. Akusticheskaya emissiya v eksperimental'nom materialovedenii [Acoustic emission in experimental materials science], Moscow, Mashinostroenie, 2002, 240 p. (in Russ.)

Klyuev V.V. (ed.) Nerazrushayushchiy kontrol': cpravochnik v 8 tomakh [Non-destructive testing: a reference book in 8 volumes. T.3. Ultrasonic testing], Moscow, Mashinostroenie, 2006, 861 p. (in Russ.)

Zuev L.B., Tsellermaer V.Y., Gromov V.E. et al. Ultra-sonic monitoring of the accumulation of aging damage and recovery of the useful lifetime of industrial parts, Tech. Phys., 1997, no.42, pp. 1094-1096. DOI: 10.1134/1.1258774

Shcherbinin V.E., Gorkunov E.S. Magnitnyy kontrol' kachestva metallov [Magnetic quality control of metals], Yekaterinburg, UrO. RAS, 1996, 263 p. (in Russ.)

Kabaldin Y.G., Anosov M.S., Shatagin D.A. Evaluation of the mechanism of the de-struction of metals based on approaches of artificial intelli-gence and fractal analysis, IOP Conf. Series: Materials Science and Engineering, 2020, no.709, 033076. DOI: 10.1088/1757-899X/709/3/033076

Savenkov G.G., Barakhtin B.K. Relationship between the fractal dimension of the surface of destruction and the complex of standard characteristics of the material in tension [Svyaz' fraktal'noy razmernosti poverkhnosti razrusheniya s kompleksom standartnykh kharakteristik materiala na rastyazhenie], PMTF, 2011, vol. 52, no. 6, pp. 177-184. (in Russ.)

Ivanova V.S., Balankin A.S., Bunin I.Zh. et al. Sinergetika i fraktaly v materialovedenii [Synergetics and fractals in material science], Moscow, Nauka, 1994, 384 p. (in Russ.)

Krasikova I.E., Krasikov I.V., Kartuzov V.V. Correlation of the values of the fractal characteristics of the structure of the material from electron microscopic photographs of the surface of the samples with the values of their physical and mechanical characteristics [Korrelyatsiya znacheniy fraktal'nykh kharakteristik struktury materiala po elektronno-mikroskopicheskim fotografiyam poverkhnosti obraztsov so znacheniyami ikh fiziko-mekhanicheskikh kharakteristik], Elektronnaya mikroskopiya i prochnost' materialov [Electron microscopy and strength of materials. Series: Physical materials science, structure and properties of materials], 2016, Iss. 22, p. 3-9. (in Russ.)

Trefilov V.I., Kartuzov V.V., Minakov N.V. Relationship between fractal dimension of the fracture surface and mechanical properties [Svyaz' fraktal'noy razmernosti poverkhnosti razrusheniya s mekhanicheskimi svoystvami], Sb.FIPS-99. Fraktaly i prikladnaya sinergetika [Coll. FIPS-99. Fractals and Applied Synergetics], Moscow, 1999, pp. 10-11. (in Russ.)

Zaiser M., Bay K., H?hner P. Fractal analysis of deformation-induced dislocation patterns, Acta Mater., 1999, vol. 47, no.8, pp. 2463-2476. DOI: 10.1016/S1359-6454(99)00096-8

Sagaradze V.V., Uvarov A.I. Uprochnenie i svoystva austenitnykh staley [Hardening and properties of austenitic steels], Yekaterinburg, RIO UB RAS, 2013, 720 p. (in Russ.)

Uglov A.L., Khlybov A.A., Pichkov S.N. et al. An acoustic method for estimating the thermal-pulsation-induced damage in austenitic steel, Russ J Nondestruct Test, 2016, no.52, pp. 53-59. DOI: 10.1134/S106183091602008X

Avdushev А.А., Pavros S.K., Peregudov A.N., Kurkov A.V. Estimating of the impulse method of ultrasound attenuation measurement error for the case of a solid media propagation [O pogreshnosti impul'snogo metoda izmereniya zatukhaniya ul'trazvuka v tverdykh sredakh], Izvestiya SPbGETU [Izvestiya SPbGETU "LETI" SERIES "Instrument making and information technology"], 2007, no.1, pp. 31-36. (in Russ.)

Muravyov V.V., Zuev L.B., Komarov K.L. Skorost' zvuka i struktura staley i splavov [Velocity of sound and structure of steels and alloys], Novosibirsk, Nauka, 1996, 183 p. (in Russ.)

Toozandehjani, Meysam & Matori, Khamirul & Ostovan, Farhad & Mustapha, Faizal & Zahari, Nur & Oskoueian, Arshin On the correlation between microstructural evolution and ultrasonic properties: a review, Journal of Materials Science, 2015, no.50(7), pp. 2643-2665. DOI: 10.1007/s10853-015-8855-x

Uglov A.L., Khlybov A.A. Experimental study of fatigue damage accumulation in steel 08cr18ni10ti under low-cycle block loading using acoustic method [Eksperimental'noe issledovanie zakonomernostey nakopleniya ustalostnykh povrezhdeniy v stali 08Kh18N10T pri malotsiklovom blochnom nagruzhenii s ispol'zovaniem akusticheskogo metoda], Physical Mesomechanics, 2015, no.18 (6), pp. 111-115. (in Russ.)




DOI: http://dx.doi.org/10.24892/RIJIE/20200203

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 A. A. Khlybov, M. S. Anosov, D. A. Ryabov

© Russian Internet Journal of Industrial Engineering. ISSN 2310-0818

E-mail: indust.engineering.ru@gmail.com

Another version of the web site: http://indust-engineering.ru