Heat for Process Operations

A.S. Kilov

Abstract


To heat the metal still more prevalent direct heating processes in electric power plants induction or contact heating. The paper shows the possibility of such electric installations for various processes, as well as the possibility of combining heating (serial or parallel) with other technological operations (combined treatment). Described the use of induction-hardening plants in research on hardening of hard alloys, as well as ways of sticking pieces exception when unloading them from the inductor. Shows the use of contact heating for quenching carbide and heating the electrolyte and by heating rolled before pressure treatment.


Full Text:

PDF

References


http://pokuym.ru/master-klass/koefficient-poleznogo-dejstviya-i-proizvoditelnost-kuznechnyx-pechej.html (date of access 10.11.2014).

Bogodukhov S.I., Kilov A.S. Improving the wear resistance of the alloy T5K10 [Povysheniye iznosostoykosti splava T5K10], Vestnik Orenburgskogo gosudarstvennogo universiteta [Journal of Oren-Petersburg state University], 2010, no. 10, pp. 127-130.

Bogodukhov S.I., Kilov A.S. Improvement of performance characteristics is hard alloys heat treatment [Povysheniye ekspluatatsionnykh kharakteristik tverdykh splavov termicheskoy obrabotkoy], Vestnik Orenburgskogo gosudarstvennogo universiteta [Vestnik Orenburg state University], 2011, no. 5, pp. 164-170.

Kilov A.S., Bogodukhov S.I. Induktsionno-zakalochnaya ustanovka [Induction hardening installation], Patent Rus. № 2463357. 2012.

Bogodukhov S.I., Kilov A.S. Induktor dlya metodicheskogo nagreva izdeliy [Inductor for methodological heating products], Patent Rus. № 2254692. 2004.

Kilov A.S., Semagina Y.V. Sposob upravleniya rabotoy ustanovki induktsionnogo metodicheskogo nagreva [A method of controlling the operation of the installation of induction heating methodological], Patent Rus. № 2287914. 2006.

Kilov A.S., Zaitsev A.A. Ustanovka dlya zakalki tverdykh splavov [Installation for quenching of hard al-loys], Patent Rus. № 115781. 2012.

Kilov A.S. The combination of high-speed heating and cooling products [Sovmeshcheniye skorostnogo nagreva i okhlazhdeniye izdeliy], Uprochnyayushchiye tekhnologii i pokrytiya [Hardening technology and coatings], 2013, no. 1, pp. 20-23.

Kilov A.S. Informatsionnyye tekhnologii i sistemy. Kniga 3: monografiya [Information technology and systems. Book 3: the monography], Krasnoyarsk, Research and innovation centre, 2011, 301 p.

Kilov A.S. Combining technological operations is one of the promising directions in the solution of production problems [Sovmeshcheniye tekhnologicheskikh operatsiy – odno iz perspektivnykh napravleniy v reshenii proiz-vodstvennykh problem], Progressivnyye tekhnologii v transportnykh sistemakh: tezisy dokl. XX Mezhdunarodnoy nauchno-prakticheskoy konf. [Advanced technologies in transport systems: abstracts XX International scientific-practical conference], Orenburg, 2011, pp. 124-125.

Kilov A.S. Heating and technological operations combination, International Journal of Applied and Fun-damental Research, 2014, №1.

Bogodukhov S.I., Kilov A.S. Ustroystvo dlya nagreva elektroprovodnykh zagotovok v elektrolite [An apparatus for heating workpieces in an electrolyte conduc-tive], Patent Rus. № 88351. 2009.

Bogodukhov S.I., Kilov A.S. Sposob obrabotki me-tallicheskikh detaley [A method of processing metal parts], Patent Rus. № 2432421. 2012.

Bondarenko V.A., Kilov A.S. Sposob izgotovleniya gnutykh detaley i ustroystvo dlya yego osushchestvleniya [Method of manufacture of bent parts and device for its implementation], Patent Rus. № 2230621. 2004.

Kilov A.S., Grebenyuk C.F. Automation of the process of removal of the stamped bent parts V-shaped in their manufacture-manufacture in the same position [Avtomatizatsiya protsessa udaleniya iz shtampa gnutykh detaley V-obraznoy formy pri ikh izgotovlenii na odnoy pozitsii], Avtomatizatsiya i sovremennyye tekhnologii [Automation and modern technology], 2005, no. 3, pp. 3-8.

Kilov A.S., Osipova T.P. Sposob elektrokontaktnogo nagreva prokata [The way electrocon-stroke heat rolled], Patent of the USSR № 1578212. 1990.

Kilov A.S., Vashchenko V.I. Sposob elektrokontaktnogo nagreva elektroprovodnykh zagotovok [The way electrocon-stroke heat conductive workpieces], Patent of the USSR № 1786123. 1993.

Kilov A.S., Karimov B.A. Ustroystvo dlya elektrokontaktnogo nagreva elektroprovodyashchego materiala [Device for electrocon-stroke heat conductive material], Patent of the USSR № 1715863. 1992.

Kilov A.S. Receiving the mounting holes for screw Assembly [Polucheniye krepezhnykh otverstiy dlya vintovoy sborki], Sborka v mashinostroyenii, priborostroy-enii [Assembly in mechanical engineering, instrument-making], 2003, no. 12, pp. 39-42.

Kilov A.S. Sposob kontaktnoy stykovoy svarki oplavleniyem [Method of flash butt welding process], Pa-tent of the USSR № 1650387. 1991.

Alexandrov A.A. Melted rotating [Plavyat vrash-chaya], Izobretatel i ratsionalizator [Inventor], 1998, no. 1, pp. 15.

Kilov A.S. Sposob izgotovleniya derevyannoy modeli [A method of manufacturing a wooden model], Pa-tent of the USSR № 1528600. 1989.

Kilov A.S. Sposob izgotovleniya vyplavlyayemoy modeli [A method of manufacturing investment pattern], Patent of the USSR № 1528601. 1989.




DOI: http://dx.doi.org/10.24892/RIJIE/20140406

Refbacks

  • There are currently no refbacks.


Copyright (c) 2016 A.S. Kilov

© Russian Internet Journal of Industrial Engineering. ISSN 2310-0818

E-mail: indust.engineering.ru@gmail.com

Another version of the web site: http://indust-engineering.ru