Influence of Selective Laser Melting Process Parameters on Porosity of TiAl6V4 Alloy
Abstract
Full Text:
PDFReferences
Wagner S.M., Walton R.O. Additive manufacturing’s impact and future in the aviation industry, Prod. Plan.
Control, 2016, vol. 27, is. 13, pp. 1124-1130. DOI: 10.1080/09537287.2016.1199824
Uhlmann E., Kersting R., Klein T.B. et al. Additive Manufacturing of Titanium Alloy for Aircraft Components, Procedia CIRP, 2015, vol. 35, pp. 55-60. DOI: 10.1016/j.procir.2015.08.061
Wauthle R., J. van der Stok, Amin Yavari S. et al. Additively manufactured porous tantalum implants, Acta Biomater, 2015, vol.14, pp. 217-225. DOI: 10.1016/j.actbio.2014.12.003
Mroz W., Budner B., Syroka R. et al. In vivo implantation of porous titanium alloy implants coated with magnesium-doped octacalcium phosphate and hydroxyapatite thin films using pulsed laser deposition, J. Biomed. Mater. Res. - Part B Appl. Biomater, 2015, vol. 103, is. 1, pp. 151-158. DOI: 10.1002/jbm.b.33170
Wang H., Zhao B., Liu C. A comparison of biocompatibility of a titanium alloy fabricated by electron beam melting and selective laser melting, PLoS One, 2016, vol. 11, is. 7. DOI: 10.1371/journal.pone.0158513
Gu D.D., Meiners W., Wissenbach K. Laser additive manufacturing of metallic components: materials, processes and mechanisms, International Materials Reviews, 2012, vol. 57, is. 3, pp. 133-164. DOI: 10.1179/1743280411Y.0000000014
Bandyopadhyay A., Espana F., Balla V.K. et al. Influence of porosity on mechanical properties and in vivo response of Ti6Al4V implants, Acta Biomaterialia, 2010, vol. 6, is 4, pp. 1640-1648. DOI: 10.1016/j.actbio.2009.11.011
Thijs L., Verhaeghe F., Craeghs T. et al. A study of the micro structural evolution during selective laser melting of Ti-6Al-4V, Acta Materialia, 2010, vol. 58, is 9, pp. 3303-3312. DOI: 10.1016/j.actamat.2010.02.004
Facchini L., Magalini E., Robotti P. et al. Ductility of a Ti-6Al-4V alloy produced by selective laser melting of prealloyed powders, Rapid Prototyping Journal, 2010, vol. 16, is 6, pp. 450-459. DOI: 10.1108/13552541011083371
Song B.B., Dong S., Liao H., Coddet C. Process parameter selection for selective laser melting of Ti6Al4V based on temperature distribution simulation and experimental sintering, The International Journal of Advanced Manufacturing Technology, 2012, vol. 61, is. 9-12, pp. 967-974. DOI: 10.1007/s00170-011-3776-6
Sun J., Yang Y., Wang D. Mechanical properties of Ti-6Al-4V octahedral porous material unit formed by selective laser melting, Advances in Mechanical Engineering, 2012, vol. 2012, 11 p. DOI: 10.1155/2012/427386
Van Hooreweder B., Moens D., Boonen R. et al. Analysis of Fracture Toughness and Crack Propagation of Ti6Al4V Produced by Selective Laser Melting, Adv. Eng. Mater., 2012, vol. 14, is. 1-2, pp. 92-97. DOI: 10.1002/adem.201100233
Leuders S., Th?ne M., Riemer A. et al. On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance, International Journal of Fatigue, 2013, vol. 48, pp. 300-307. DOI: 10.1016/j.ijfatigue.2012.11.011
Li H.X., Huang B.Y., Sun F., Gong S.L. Microstructure and Tensile Properties of Ti-6Al-4V Alloys Fabricated by Selective Laser Melting, Rare Met. Mater. Eng., 2013, vol. 42, pp. 209-212.
Sun J., Yang Y., Wang D. Parametric optimization of selective laser melting for forming Ti6Al4V samples by Taguchi method, Optics & Laser Technology, 2013, vol. 49, pp. 118-124. DOI: 10.1016/j.optlastec.2012.12.002
Gong H., Rafi K., Gu H. et al. Analysis of defect generation in Ti-6Al-4V parts made using powder bed fusion additive manufacturing processes, Additive Manufacturing, 2014, vol. 1, pp. 87-98. DOI: 10.1016/j.addma.2014.08.002
Dhansay N.M., Tait R., Becker T. Fatigue and Fracture Toughness of Ti-6Al-4V Titanium Alloy Manufactured by Selective Laser Melting, Adv. Mater. Res., 2014, vol. 1019, pp. 248-253. DOI: 10.4028/www.scientific.net/AMR.1019.248
Bartolomeu F., Faria S., Carvalho O. et al. Predictive models for physical and mechanical properties of Ti6Al4V produced by Selective Laser Melting, Materials Science and Engineering: A, 2016, vol. 663, pp. 181-192. DOI: 10.1016/j.msea.2016.03.113
Yang J., Yu H., Yin J. et al. Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting, Mater. Des., 2016, vol. 108, pp. 308-318. DOI: 10.1016/j.matdes.2016.06.117
Spierings A.B., Schneider M., Eggenberger R. Comparison of density measurement techniques for additive manufactured metallic parts, Rapid Prototyp. J., 2011, vol. 17, is. 5, pp. 380-386. DOI: 10.1108/13552541111156504
Vilaro T., Colin C., Bartout J.D. As-fabricated and heat-treated microstructures of the Ti-6Al-4V alloy processed by selective laser melting, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2011, vol. 42, is. 10, pp. 3190-3199. DOI: 10.1007/s11661-011-0731-y
Tolochko N.K., Laoui T., Khlopkov Y.V, et al. Absorptance of powder materials suitable for laser sintering, Rapid Prototyp. J., 2000, vol. 6, is 3, pp. 155-160. DOI: 10.1108/13552540010337029
DOI: http://dx.doi.org/10.24892/RIJIE/20170405
Refbacks
- There are currently no refbacks.
Copyright (c) 2018 R. M. Baitimerov, L. V. Radionova, E. V. Safonov
© Russian Internet Journal of Industrial Engineering. ISSN 2310-0818
E-mail: indust.engineering.ru@gmail.com
Another version of the web site: http://indust-engineering.ru