Obtaining Joints of Dissimilar Materials under Electric-Impulse Welding – Pressing

V. G. Vinogradov, E. L. Strizhakov, S. V. Nescoromniy

Abstract


A study of the process of high-speed consolidation of powder materials with the simultaneous formation of a welded joint with the surface of the metal base is presented. Thermal and power effects are used as a result of passing the current pulse through the powder composition and the inductor. The electric circuit of the gradual connection of the processing zone and the magnetic hammer, consisting of a flat inductor and a pusher, is proposed.

The electric impulse welding-pressing device (EIWP) is connected to a impulse current generator (ICG) with a capacitive energy storage. Impulse currents of 200 - 300 kA allow to obtain Joule heat, warming up the composition to pre-melting temperatures (0,6-0,8) Tm, and magnetic pressure of 500?106 N/mm2 during the process (100-200)?10-6 s. The equipment with energy consumption up to 10 kJ with a discharge frequency of 5 kHz is used.

The study of the connection zone showed that the welding of the composition with monolithic materials occurs in the solid phase, new structures are not formed.

The implemention of a monolithic material in the form of a wire into the pressing zone allows to obtain a connection of dissimilar materials keeping the original structure. In this case, the powder composition is a connecting element. Thus, copper compounds with steel, aluminum, brass and other materials are obtained. The dependences of the strength of compounds on the discharge energy of ICG are obtained

Full Text:

PDF

References


Lysak V.I., Krokhalev A.V. Pressovanie poroshkov vzryvom: monografiya [Pressing powders by explosion: monograph], Moscow, Mechanical Engineering, 2015, 252 p. (in Russ.)

STO Gazprom 2-2.2-136-2007 Instruktsiya po tekhnologiyam svarki pri stroitel'stve i remonte promyslovykh i magistral'nykh gazoprovodov, chast' 1 ["Instruction on welding technologies in the construction and repair of field and main gas pipelines, part 1"], Moscow, Publishing House LLC Scientific Research Institute of Natural Gases and Gas Technologies - VNIIGAZ, 2007. (in Russ.)

Baranov Yu.V., Troitskiy O.A. Fizicheskie osnovy elektroimpul'snoy i elektroplasticheskoy obrabotok i novye materialy [Physical foundations of electropulse and electroplastic treatments and new materials], Moscow, Min. arr. RF, IMASH named after Blagonravova, MGIU, 2001, 843 p. (in Russ.)

Belyavin K.E., Minko D.V., Kuznechik O.O. Modeling of the process of electric-discharge sintering of metal powders, Journal of Engineering Physics and Thermophysics, 2004, vol. 77, no. 3, pp. 628-637. DOI: 10.1023/b:joep.0000036510.38833.05

Anisimov A.G. Mali V.I. Possibility of electric-pulse sintering of powder nanostructural composites, Combustion, Explosion, and Shock Waves, 2010, vol. 46, no. 2, pp. 237-241. DOI: 10.1007/s10573-010-0035-3

Grigoryev E.G., Bazanov V.N. Electric Current Pulse Welding of Titanium with 18-10 Stainless Steel, Advanced Materials Research, 2009, vol. 83-86, pp. 1251-1253. DOI: 10.4028/www.scientific.net/amr.83-86.1251

Grigoryev E.G. High voltage electric pulse welding of titanium with stainless steel, Machines, technologies, materials, 2011, vol. 8, pp. 8-10.

Grigoryev E.G., Olevsky E.A. Thermal processes during high-voltage electric discharge consolidation of powder materials, Scripta Materialia, 2012, vol. 66, pp. 662-665. DOI: 10.1016/j.scriptamat.2012.01.035

Neskoromny S.V., Strizhakov E.L., Ageev S.O., Perlov D.S., Arsunoev M.M., Lemeshev S.V. Sposob polucheniya soedineniy raznorodnykh elektroprovodnykh materialov i ustroystvo dlya ego osushchestvleniya [Method for obtaining of connections of diverse conducting materials and device for its implementation], Patent of Russia no. 2551329, 2015, Bull. No. 14. (in Russ.)

Neskoromny S.V., Strizhakov E.L., Merkulov R.V. Ustroystvo dlya udarnoy kondensatornoy svarki s magnitno-impul'snym privodom [A device for shock condenser welding with a magnetic pulse drive], Russian Patent no. 96515, 2010. (in Russ.)

Strizhakov E.L., Neskoromny S.V., Rachkov M.A. Ustroystvo dlya elektroimpul'snogo spekaniya [Device for electropulse sintering], Patent of Russia no. 136754, 2014, Bull. No. 2. (in Russ.)

Neskoromny S.V., Strizhakov E.L. Ustroystvo dlya udarnoy kondensatornoy svarki sterzhnevykh detaley s ploskim osnovaniem [Device for shock condenser welding of rod parts with a flat base], Russian Patent no. 70839, 2008. (in Russ.)

Strigakov E.L., Kem A.Yu. Technological features of obtaining of compound powder parts with usage innovative P/M processes for high performance metals -vacuum – thermal magneto – pulse pressing, 16th International PLANSEE Seminar, Austria, Reutte/Tirol, 2005, vol. 4, is 14, pp. 287-293.

Strizhakov E.L., Neskoromny S.V. Development of discharge-pulsed equipment for applied studies of magnetic-pulsed welding processes, Welding International, 2016, vol. 30, is. 10, pp. 813-816. DOI:10.1080/09507116.2016.1148409

Lemeshev S.V., Neskoromny S.V., Strizhakov E.L., Ageev S.O. Discharge-pulse compression of composite materials [Razryadno-impul'snoe pressovanie kompozitsionnykh materialov], Vestnik donskogo gosudarstvennogo tekhnicheskogo universiteta [Bulletin of the Don State Technical University], 2015, vol. 15, no. 4, pp. 76-81. (in Russ.)

Minko D.V., Belyaev K.V., Sheleg V.K. Pulse electrophysical methods of CREATING THE composite materials and modified structures [Impul'snye elektrofizicheskie metody polucheniya kompozitsionnykh materialov i modifitsirovannykh struktur], Trudy "Innovatsii v mashinostroenii (inmash-2015)" [Proc. "Innovations in mechanical engineering (inmash-2015)"], 2015, pp. 337-342. (in Russ.)

Falcon E., Castaing B. Electrical properties of granular matter: From "Branly effect" to intermittency, Powders & Grains, 2005, pp. 323-327.

Yusupov R.Yu., Popov A.P. Methods and technique of experimental studies of fast processes MIOM [Metody i tekhnika eksperimental'nykh issledovaniy bystroprotekayushchikh protsessov MIOM], Trudy "Magnitno-impul'snaya obrabotka materialov. Puti sovershenstvovaniya i razvitiya [Proc. "Magnetic pulse processing of materials. Ways of improvement and development], 2007, Samara, 2007, pp. 260-270. (in Russ.)

Medvedev Yu.Yu. Formirovanie poroshkovogo materiala pri elektroplasticheskom uplotnenii: avtoreferat diss. kand. tekhn. nauk [The formation of powder material during electroplastic compaction: abstract diss. cand. tech. sciences], Novocherkassk, 2003, 18 p. (in Russ.)

Anisimov A.G., Mali V.I. Possibility of electric-pulse sintering of powder nanostructural composites, Combustion, Explosion, and Shock Waves, 2010, vol. 46, no. 2, pp. 237-241. DOI: 10.1007/s10573-010-0035-3

Sch?tte P., Garcia J. Electro Discharge Sintering as a process for rapid compaction in PM-Technology, Proc. EURO PM Copenhagen, 2009, vol. 3, pp. 91-99.

Olevsky E.A., Kandukuri S. Consolidation enhancement in spark-plasma sintering: Impact of high heating rates, Journal of Applied Physics, 2007, vol. 102, is. 11, 114913. DOI: 10.1063/1.2822189




DOI: http://dx.doi.org/10.24892/RIJIE/20200105

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 V. G. Vinogradov, E. L. Strizhakov, S. V. Nescoromniy

© Russian Internet Journal of Industrial Engineering. ISSN 2310-0818

E-mail: indust.engineering.ru@gmail.com

Another version of the web site: http://indust-engineering.ru